Rachael Pasini

Too often, manufacturers treat hydraulic fluids as commodities instead of critical system components. But with rising costs and the need for optimization, fluid cleanliness and efficiency should be top of mind. At IFPE 2023, Zach Sutton, Chevron Lubricants Industrial & Services Sector Specialist, shared insights with Fluid Power World on how Chevron is taking the…

Duplomatic MS, part of the Daikin Group, will be exhibiting at SPS 2023, the industrial automation fair to be held May 23-25, 2023 (stand F043 — hall 5) at Fiere di Parma, Italy. The company will showcase its linear motion solutions developed by the Mechatronics Business Unit and the inverter-controlled hybrid systems, according to the…

Pirtek USA saw strong growth at the beginning of 2023 with five openings and 15 new franchisee signings. The new franchise agreements exceed the growth numbers for all 2022 and signal the growing demand for top-tier hydraulic and industrial service providers nationwide. Since January, Pirtek has opened five locations in Atlanta; National City, California; Covington, […]

Singer Industrial recently joined forces with Hotsy Industrial Systems, which will operate within Singer Industrial’s Fluid Power Division and increase the company’s North America footprint to approximately 85+ locations with over 1,000 employees. Hotsy Industrial Systems, established in 1994, has been owned and operated by Christy Thomas since 2015. Since purchasing the business, Christy has…

I don’t know if it was the Las Vegas rain or the underground Tesla shuttles, but IFPE 2023 felt like an alternate reality. With more than 1,800 exhibitors spanning 2.8 million square feet, the joint CONEXPO-CON/AGG and IFPE event was larger than life and full of energy, technology, and — best of all — people.…

Compressed air quality is crucial for aerospace manufacturing, as aircraft components and tools must be of the highest quality and precision. This demanding standard for component quality urges aerospace manufacturers to utilize compressed air with specific requirements. The air must be clean, dry, and unvaried under pressure. If the air becomes dirty, moist, or varies […]

In recreational boating, hydraulic power units (HPUs) provide the muscle behind critical operating machinery used to transport, launch, or secure small craft, including lifts, trailers, and jacks. For boat lifts alone, OEMs produce a variety of configurations, such as bottom standing, piling mount, floating, and shore mounted. These machines and configurations rely on hydraulic systems […]

Vacuum gripper technologies provide many advantages for machine and OEM payload handling. Designers find that modular gripper system kits are a versatile and rapid way to create handling solutions, with other benefits such as internal vacuum routing. By Pat Phillips, AutomationDirect Manufacturing equipment, pick-and-place systems, robotics, and other machinery typically need to reliably grip products, […]

Parker Hannifin showcased a variety of technologies at IFPE 2023. The booth featured new and evolved products in their smart electrification technology portfolio aimed at enabling battery-powered machines. Though Parker is known for hydraulics, the company has been creating electric components and integrating hydraulics into electric systems for almost 40 years. At IFPE, Parker displayed…

For years, Coxreels has supplied heavy-duty reels with triple axle supports and solid ¼-in. plate bases for demanding applications and environments. But sometimes heavy duty or industrial duty is not enough for applications in mining, heavy equipment, lubrication, and other off-road industries with demanding remote environments and extreme conditions. Coxreels recently introduced a new addition […]

As a new editor of Fluid Power World, I’m granted the privilege of meeting people and attending industry events with fresh eyes. I’ve heard stories of this tight-knit fluid power community and how passionate everyone is about the industry. Though I arrive with an open mind and eagerness to learn, my expectations continue to shatter…

Piab has continued to evolve its piCOBOT program by adding a larger version, the piCOBOT L. Developed for customers who work with small industrial robots and cobots, its high payload and low building height enable maximum capacity usage. The piCOBOT family consists of two pump units and a selection of grippers. Optionally, a tool changer with […]

Sometimes, a small change can make a big difference. In this case, small means a 1 x 1 in. sticker that holds hydraulic cylinder nameplate information. Milwaukee Cylinder’s new self-adhesive Electronic Service Tag allows customers to download nameplate information, such as the serial number and cylinder properties, and request a seal kit or duplicate cylinder quote with a…

Forest machine manufacturer Ponsse is launching the new HH360 rotator, which lets the harvester head freely rotate 360° without limitations. The harvester head speeds up wood processing, makes the operator’s job easier, and reduces hose failures. The product was developed in close cooperation with hydraulic motor and rotator manufacturer Black Bruin, and Ponsse has exclusive […]

Danfoss Power Solutions has named Carina Christine Skovmøller as director of its Center for Sustainability, a newly created role. Based in Copenhagen, Skovmøller reports directly to Andreas Schumacher, senior director, Centers of Excellence. Skovmøller and her team will support the organization in its ESG (environmental, social, and governance) journey, focusing primarily on sustainability. She’ll be responsible…

Known for reliability, innovation, and focus on miniature pneumatics, Clippard’s Cordis Pressure Controllers use the proven EVP and DVP proportional valve series allowing for steady, accurate, and repeatable downstream pressure control as demand or process changes. The result is a very precise linear pressure control within a closed-loop system providing ultra-high resolution and repeatability. The […]

Hydraulic fittings and couplings are often overlooked in mobile machinery design, yet they play a critical role in any fluid power system. In extremely high-pressure hydraulic applications, a leak or accidental disconnection can cause serious personal injury or damage to machinery. Therefore, machine builders must select fittings of the correct size, material, pressure and temperature […]

Sustainability continues to trend across the fluid power industry, as design engineers must develop more efficient products to meet the industry’s sustainability needs. Hydraulic seals, though relatively small in design, play a huge role in waste, emissions, efficiency, and overall environmental impact. At IFPE, companies such as Hallite will introduce new products that demonstrate sustainable […]

Ergonomics, safety, efficiency, and refined quality are key themes for hydraulic hose applications these days. Machine builders are looking for hoses that improve service life and fit their exact specifications. Therefore, manufacturers are designing more durable and flexible hose solutions for heavy-duty mobile machines and evolving electro-hydraulic systems. “A hose’s working pressure, flexibility, and lifetime […]

Trelleborg Sealing Solutions gains International Automotive Task Force (IATF) certification to perform subassembly work for automotive manufacturing customers and Tier 1 suppliers at its ServicePLUS Centers located in Menomonee Falls, Wisconsin, Vancouver, Washington, Ontario, California, as well as at its Logistics Center in Fort Wayne, Indiana. “IATF certifications are important to the automotive industry for […]

APEM announced the expanded availability of the XS Series low-profile joystick/thumbstick, ideal for robust applications requiring precise control of industrial equipment, construction vehicles, and marine vessels. Many of the most challenging industrial, commercial, and marine applications incorporate extensive operator control interfaces via wired or wireless consoles, armrests, belly boxes, and pendants. Users need responsive multi-axis…

Hydro Electronic Devices (HED) announced the release of the company’s newest generation of user interface displays. The new displays, available in 5, 7, 12, and 15 in. sizes, feature a 1000 nit IPS display with an optically bonded AR lens allowing for outstanding sunlight viewability. They are sealed to IP67, enabling both in-cab and externally […]

The International Fluid Power Exposition (IFPE) team at Hallite is pleased to announce three new product introductions at the show this year. Hallite recognizes the need to provide product innovation that reduces environmental impact without compromise to quality and performance. The latest innovations enable customers to partner with Hallite on this path. The new products […]

For CONEXPO 2023, Komatsu will be in booth W42044, and the theme for the show will be “Creating value together.” With the right products, latest technologies, actionable data, and dealer support, Komatsu helps customers create value to help achieve their visions for productivity, efficiency, sustainability, and safety. The Komatsu booth will feature equipment, technology, and […]

Milwaukee Cylinder announced its new Electronic Service Tag, which comes standard on its H, MH, LH, and A series cylinders and allows smartphones to be used to download cylinder nameplate information and to request a seal kit or duplicate cylinder quote right from the phone. The tag contains both an NFC chip and a printed…