Inclination measurement in mobile machines is exposed to motion, shock and vibration. Under these influences normal inclinometers will give incorrect values affecting sensor accuracy. ASM Sensors introduces the Positilt PTK29 inclination sensor that compensates dynamic influences to give correct values even when in motion. The sensor measures inclination between ±180° with 1 axis or ±60° […]
Turck debuts PT2000 line of pressure transmitters at IFPE
Working in the harsh environments that mobile machinery runs in requires tough components that can withstand abuse. That’s why Turck introduced the PT2000 line of pressure transmitters at IFPE 2017. This line features a welded stainless steel measuring cell for increased durability and increased chemical compatibility. The PT2000 offers a solution that has no elastomer […]
Smart pneumatics relies on sensor-driven data to eliminate wires, predict system status
Taking the guesswork out of condition monitoring, operation and maintenance tasks can be done with Aventics Smart Pneumatics Monitor, which offers data acquisition and control of critical components within a pneumatics system. Using a valve bank that communicates via an I/O Link with sensors on the cylinder, pressure sensors, pressure regulators and other sensors, users […]
LVITs suitable for cylinder and actuator feedback
Alliance Sensors Group has announced the expansion of the ME, MR, MHP, and now the SS-7 Series linear position sensors, used to measure the ram position of hydraulic and pneumatic cylinders in industrial, mobile, or subsea applications. With no magnet required, the installation and cost of ownership is dramatically reduced without sacrificing accuracy specifications. The ME […]
What is LVIT technology?
LVITs—Linear Variable Inductive Transducers—have been around for more than 30 years, and are becoming very popular, due to their relatively low cost and flexibility to be packaged in…
Viatran introduces rugged all-stainless industrial pressure transmitters
Viatran has announced the global market introduction of its Model 24A/34A Series. The Model 24A/34A Series is a family of general purpose industrial pressure transmitters, designed for optimal application versatility…
Using your senses to better understand your system
By Josh Cosford, Contributing Editor Sensors used in fluid power are available to measure anything from pressure, flow, temperature, position and more. Understanding their differences will help you…
LVIT Technology replacing linear potentiometers with a contactless solution
H. G. Schaevitz LLC Alliance Sensors Group has expanded its sensor product offering by adding a line of LR-19 Series Inductive Linear Position Sensors using LVIT Technology; contactless…
LR-27 Series Heavy Duty LVIT Inductive Linear Position Sensor
Alliance Sensors Group has expanded its sensor product offering by adding to its line the LR-27 Series Inductive Linear Position Sensors. These are contactless devices designed for factory…
Sigma-Netics New 2-Pin Deutsch Pressure Switch
Sigma-Netics Inc. has added a 2-pin Deutsch connector option to its 784 Series of ruggedized pressure switches. The 2-pin option allows the 784 Series to serve a wider…
Linear position sensors help cylinders control air and fuel in blast furnaces and power plants
A popular application for linear position sensors is hydraulic cylinder position feedback for valve actuators. The position sensor is installed into the back end of the cylinder. The sensing element rests in a cavity that has been gun-drilled through the piston and cylinder rod, extending the full length of the mechanical stroke. A magnet ring…
Direct stroke measurement for hydraulic cylinders
Edited by Mike Santora Whether it’s agricultural machinery, construction equipment or municipal vehicles, intelligent sensors are indispensable nowadays throughout the mobile machine market. Recording paths and angles is an integral component of intelligent operating functions. These functions improve not only the convenience, but also the safety of mobile machines. Using intelligent sensors also increases the…
Bluetooth embedded amplifier for proportional cartridge valves goes wireless
If you are of a certain age, you might remember when nearly every electronic device had a cord. You also might remember having been tripped, or tangled in those wires as well. In your home, the stakes were fairly low. That’s not usually the case in the field, where they can also pose real safety…
What is a pressure gauge?
Editor’s note: This article was updated with expanded information on digital and dry pressure gauges, as well as gauge calibration. A pressure gauge is a fluid intensity measurement device. Pressure gauges are required for the set-up and tuning of fluid power machines, and are indispensable in troubleshooting them. Without pressure gauges, fluid power systems would…
Gems Sensors & Controls announces launch of OEM pressure transmitters and switches for hazardous area environments
Gems Sensors & Controls has announced the global market launch of its Model 3800/3820 Series. The new Gems Model 3800/3820 Series is a family of OEM pressure transmitters and switches for hazardous area and other hostile environments. The new Model 3800 Series pressure transmitter is available in seven unique ranges from 0 to 10,000 PSI…
ME and MR Series Inductive Linear Position Sensors
Alliance Sensors Group is pleased to announce the continued success of the ME and MR Series Linear Position Sensors used to measure the ram position of hydraulic and pneumatic cylinders in industrial, mobile, or subsea applications. With NO MAGNET REQUIRED the installation and cost of ownership is dramatically reduced without sacrificing accuracy specifications. The ME…
New Miniature Metal Inductive Sensor from Balluff
Balluff expands its inductive sensor miniature line with the addition of the BES R04 block sensor. This robust metal housed inductive sensor is ideal for extreme applications where every day hostilities can challenge standard sensors. The sensor also offers a ceramic sensing face making it an excellent choice for applications with weld spatter, metal debris,…