Pirtek USA, a global on-site and retail hydraulic and industrial hose service provider, announced that Mike McCarthy has been appointed as the company’s Chief Operating Officer, effective January 1. McCarthy has more than 40 years of operational experience with suppliers of engineering products and services to manufacturing and construction companies. After co-owning and operating Pirtek […]
What hydraulic hose cutting blades should you use?
By Josh Cosford, Contributing Editor Every hydraulic hose must first be cut to length before assembly, and one would think all cutting methods are equal. The truth is quite the opposite actually. Any safe, reliable hose assembly requires a perfectly cut hose tip to allow the ends to fit snug before crimping. Any amount of […]
Hannay Reels showcases reels for NTEA’s Work Truck Week 2022
Hannay Reels is set to showcase their industry-leading reels at the 2022 Work Truck Week from March 9-11 at the Indiana Convention Center. Located in booth #1428, Hannay Reels will exhibit products designed with unique features to meet industry needs. Ruggedly designed with only the highest-quality materials, Hannay reels are suitable for a wide variety […]
Premium hoses for high-pressure applications
HANSA-FLEX has developed a hydraulic hose line series for high pressures and extreme applications up to 450 bar (6,527 psi). These hose products also perform reliably under highly dynamic loads such as encountered on hydraulic presses and hydrostatic drives. In addition, the premium hose line series is DNV-approved for use in the maritime sector and […]
Split hydraulic flange plugs protect against damage and debris contamination
MOCAP is pleased to announce that it has added another product line to its ever-expanding offerings: the SHF series Split Hydraulic Flange Plugs. These plugs are designed for use on SAE 3,000 lb., four-bolt split hydraulic flanges, allowing for maximum flexibility. Designed to protect the port, flange surface and bolt holes from damage and debris […]
Why you should avoid NPT fittings
By Josh Cosford, Contributing Editor No matter how malevolent, some objects of desire seem to allure us despite our righteous awareness – diesel engines, plastic bags, Tik Tok. Indeed, we like to think that we always choose what’s best for our conscience when offered a choice, assuming we have one. Unfortunately, sometimes we indulge in […]
Dayco expands hydraulics hose and couplings line in North America
Dayco, an engine products and drive systems specialist for the automotive, industrial and aftermarket sectors, is rounding out its hydraulic offering with the expansion of its KWIK-FLEX product line, a competitively priced line that was only available on a limited basis in Canada. KWIK-FLEX now includes more comprehensive coverage for the most popular types and […]
When should you use hydraulic hose protective wrap?
By Josh Cosford, Contributing Editor Modern hydraulic hose is no less susceptible to abrasion opportunities than in the past. Some applications cannot avoid abrasion, such as booms or arms on mobile lifts and similar equipment. In addition, any joint that pivots or rotates requires a flexible connection between two fixed connections, and sometimes the movement […]
Coxreels launches Ship Ready program for hose reels
Coxreels goal has always been to listen to its customer’s needs and the challenges they face. Using this feedback, the company works to deliver the products and services that will help grow clients’ business. As a result of this feedback, Coxreels is excited to announce its new Shipping Program called, “Coxreels Ship Ready.” The ultimate […]
Is “smart crimping” the future in hose assembly?
IoT-enabled crimpers can improve crimp production, keep track of data and simplify maintenance and troubleshooting. Contributed by Thomas Carpenter, Gates Global Product Line Manager – Connected Platforms Although the process of hydraulic hose crimping has been around for decades, in the last few years technology has changed the landscape, completely redefining what is possible in the […]
Common considerations for hydraulic tubing
By Josh Cosford, Contributing Editor The metal tube assemblies used in hydraulic plumbing applications offer one of the most reliable methods to transfer fluid under pressure. Still, their factors for design and installation are sightly more complicated than hose assemblies, which are traditionally more popular. Mills make seamless tubing used for hydraulic systems by pushing […]
MegaSys MXG 5K hydraulic hose is light-weight, flexible and durable
Gates has introduced its latest breakthrough hydraulic hose, the MegaSys MXG 5K, which is lighter, more flexible and more durable than a typical 5,000 psi (350 bar) hydraulic hose. “Our ongoing commitment to research and development has resulted in another world-first innovation from Gates. MXG 5K sets a new standard for hydraulic hose,” said Mike […]
Why should you cap your hose assemblies?
Once a hydraulic hose assembly has been properly cleaned and crimped, there is still one more important step to ensuring they remain clean and contamination-free before use. Plumbing systems are often the largest locations for built-in contamination versus the rest of the hydraulic system. So, immediately capping the hose ends with either protective injection molded […]
Pirtek USA continues growth through franchises in four states
Pirtek USA, a global on-site and retail hydraulic and industrial hose service provider, has demonstrated the strength of its brand by signing eight new franchisees to the system during the third quarter of 2021. PIRTEK USA was also named #123 on the 2021 Franchise Times Top 400 list. Since July, Pirtek has signed franchise agreements […]
Why should you clean your new hose assemblies?
Hydraulic hoses may appear clean upon arrival in your facility, but every step of the hose fabrication process creates internal contamination that needs to be removed. For instance, they may have contamination from the manufacturer — residual mandrel lubrication may still be inside the hose. Additionally, unless they are sealed from manufacture to your shelves, hoses […]
Which is better — spiral or braided hydraulic hose?
Hydraulic hose uses a reinforcement material sandwiched between its inner tube and outer cover. Although modern designs have used anything from textile fiber to polyester, most hydraulic hoses use steel wire as their reinforcement. Within the steel reinforcement type, there are two major construction styles – braided or spiral wire. Wire has almost no bending […]
Graco upgrades LDX, SDX and XDX hose reels
Graco Inc. has announced the launch of its LDX, SDX and XDX series of hose reels, allowing for smoother releases and consistent recoiling with less maintenance. The family of versatile retractable hose reels handle all common fluids with unmatched durability. Choose from the industrial-grade LDX, professional-grade SDX and extreme-heavy-duty XDX hose reels. They include a robust […]
What are the best materials for pneumatic tubing and hoses?
Within industrial plants and facilities that rely on pneumatic equipment, pipes convey air from the compressor to various filters, dryers, and air preparation systems. Once at the machine level, tubing and hoses distribute air to valves, cylinders, pressure regulators, and other pneumatic components. Rather than using rigid pipes, most of today’s pneumatic systems rely on […]
The evolution of hydraulic hose crimping
From their humble hand-operated beginnings to IoT-enabled machines, hydraulic hose crimpers are a critical piece of equipment that any fluid power user should understand. By Josh Cosford, Contributing Editor You’d be hard-pressed to find anyone in this hydraulic industry who has never made a hydraulic hose assembly. Hydraulic technicians make their livings fabricating plumbing of […]
New swivel options available for Coxreels SLPL spring-driven models
Coxreels has made a product enhancement to the spring-driven 1¼ and 1½ in. SLPL models. Prior to this update, these models of the SLPL came standard with Coxreels’ aluminum inline swivel. Optional on all of these models was the outsourced 90° swivel. For customers needing a stainless steel fluid path, the outsourced 90° stainless steel […]
PIRTEK USA launches industrial hose product line
PIRTEK USA has launched a new product line of industrial hose to enhance available products and services to clients in mining, petro-chemical and pharmaceutical industries. The new industrial hose will expand PIRTEK USA’s range of product offerings and will create the ability to service additional types of machinery and equipment through all of its franchise […]
New hydraulic crimper program simplifies selection process
Dayco, an engine products and drive systems specialist for the automotive, industrial and aftermarket industries, has launched a crimper program for customers in North America that stock hydraulic components. Designed to introduce all industrial customers to the benefits of using a premium Dayco crimper, the company’s new hydraulic crimper program helps simplify the process of […]
How do you overcome hydraulic hose maintenance challenges?
By Josh Cosford, Contributing Editor Most consider a hydraulic hose to be maintenance-free. They’re often installed and forgotten until they need replacement, hopefully not under conditions of catastrophic failure. Contrary to popular belief, hydraulic hose does not enjoy infinite service life. Like any component manufactured from metal and rubber, you may undoubtedly expect failure in […]
Pirtek sees increased demand for products and services
Last month, Pirtek announced that it had added eight new franchise locations, as demand continues to increase throughout the pandemic. I spoke with Nick Ridgway, Director of Franchise Development of PIRTEK USA, to learn more about this growth and what the mobile hose company expects for the near future. FPW: Can you detail the type […]
Upcoming hose and flange webinars from Fluid Power World
June will see several opportunities for users to learn about hydraulic hose assembly designs, with upcoming Fluid Power Technology Conference (FPTC) and Fluid Power World webinar presentations. On June 22 at 2 p.m., Robert Mackey, General Manager of Main Manufacturing Products Inc. will take the FPTC stage with his talk on “Specifying hydraulic flanges and […]